Easy Bar® Kiln Tire Lube

Easy Bar® Specialty Lubricant for Rotary Kiln Tire – High Temperature Solid Lubricant Bars

PERFORMANCE PRODUCTS TECH (FZE) offers specialty lubricant for rotary kilns, the high temperature kiln tire lube.

Easy Bar® is environmentally friendly, cost-effective, and easy to use. Easy Bar® lube has the highest auto-ignition point in the industry.

There is no chance of dangerous flame ups, ensuring the safety of your equipment as well as your employees. Such product known as Easy Bar® lube requires fewer applications than our competitors, crafted graphite composition and load carrying properties. Easy Bar® dry graphite lubricant has ability to reduce application time to less than one minute a week per tire, thus greatly minimizing the oilers exposure to the hostile kiln atmosphere.

Lubricates the inside tire bore and wears pads of Rotary Kilns and Dyers

Importance of Easy Bar® tire bore lubricant: Lubrication of kiln tires is an important part of overall kiln maintenance.  It is proven to reduce wear that results from the scoring of the inside bore of the kiln riding ring.  When the kiln tire lubricant is properly used with the latest technologies, it can slow the wear of filler bars, stop blocks and eliminate breakage of filler bar welds.


Easy Bar® kiln tire lube, consists of a special auto point synthetic thickener with organic and metallic solid film-forming components. The use of easy bar lube deposits its solid film onto surfaces of the kiln filler bars and kiln tire ring bore to assure maximum protection against galling and cold welding.

Easy Bar® lube, applying an easy solid bar of lubricant between the filler bars of a rotary kiln.  The lubrication bars melt upon contact and the rolling action of the kiln distributes solid film-forming lubrication to the surface of its filler bars, ring bore, and stop blocks.  A thin temperature-resistant film lubricant (caused by lubrication bars) creates a barrier between these moving surfaces, filling in microscopic imperfections and assuring protection from cold welding and galling.

Advantages of kiln tire bore lubricant: The Easy Bar® kiln tire lube  product is specially designed for application on stop block riding rings and filler bars of horizontal calciner, rotary kiln, and dryers, and is proven to:

Further

The high-temperature dry graphite lubricant, melting lube bar that does not auto-ignite at less than 1000°F

This Easy Bar® dry high-temperature lubricant contains no chlorine, bromine, or other halogens that create health risks at high temperatures.

Easy Bar® bars Inserts between the filler bars or kiln shell and riding rings of rotary kilns & dryers.

Easy Bar Kiln Tire Lubricant Melts & releases temperature tolerant solid lubricants that reduce friction and wear as the kiln rotates, expands, and contracts.

Easy Bar® kiln tire lubricant is installed in one revolution of the kiln, reducing workers’ exposure to a hostile environment.

Easy Bar® kiln tire lube: Reduces costly wear that results from the scoring of the inside bore of the Riding Ring.

Easy Bar® lubrication bars eliminate breakage of filler bar welds and retards wear of filler bars and stop blocks.

Use of Easy Bar® the dry graphite lubricant requires only one application per week versus two or three times a week as suggested with other lubrication methods.

Easy Bar® kiln solid graphite lube bars, increases employee productivity – application takes a fraction of the time of other methods.

Easy Bar® is a high-temperature kiln lubricant in the form of a solid bar inserted between the kiln tire bore and the kiln shell. Our patented lubricant melts slowly, enabling precise distribution of graphite and copper to desired areas. Easy Bar® does not become slippery and slide out after insertion.

Filler rods and refractory bricks are an important part of the life of the kiln shell. When properly maintained and lubricated, the filler rod allows the ride ring to float during thermal expansion under operating conditions. Excessive wear of the filler rods can lead to high ovality conditions, which can lead to loss of refractory material and possible misalignment of the ride ring with the kiln shell. A protective graphite lubricating coating extends the life of the filler rod and reduces wear on the filler rod surface and ride ring bore, while also minimizing stop and ride ring scratching. Not only will this save you maintenance costs, but it will also extend the life of your kiln, saving you $20,000 to $60,000 per tire section.

Installation of Easy Bar® Rotary Kiln Tire Lube

Installation of Easy Bar® kiln tire high temperature lubricant; involves placing a whole lube bar between the filler bars or pads at the five or seven o’clock positions every quarter turn of the kiln as it travels through one full revolution.


The number of lube bars used per tyre/pier may vary depending upon the operational parameters of a kiln. These parameters can include the speed of kiln rotation, temperature, and the load of the kiln shell itself. The shell of the kiln should be at or above 125 degrees Fahrenheit when the bar is applied. The standard frequency of application is four bars per tire pier per week.

Please Visit - Easy Bar® Kiln Tire Lubricant: Proof Of Performance

Further:

The only melting lube bar that does not auto-ignite at less than 1000°F.

It contains no chlorine, bromine, or other halogens that create health risks at high temperatures

Easy Bar® Inserts between the filler bars or kiln shell and riding rings of rotary kilns & dryers.

Easy Bar® Kiln Tire Lubricant Melts & releases temperature tolerant solid lubricants that reduce friction and wear as kiln rotates, expands and contracts.

Easy Bar® lube is installed in one revolution of the kiln, reducing workers’ exposure to a hostile environment.

Easy Bar® kiln tire lube: Reduces costly wear that results from the scoring of the inside bore of the Riding Ring.

Eliminates breakage of filler bar welds and retards wear of filler bars and stop blocks.

Easy Bar® kiln solid graphite lube bars, increases employee productivity – application takes a fraction of the time of other methods.

Easy Bar® kiln tire bore lubricant is applied between filler bars of rotary kiln. Easy bar melts on contact. Kiln rolling action distributes solid film-forming lubrication to the surface of its filler bars, ring bore & stop blocks.  Thin temp-resistant film makes a barrier between moving surfaces, filling microscopic imperfections. Rotary Kiln

Lubricant KTL 100

Easy Bar® Rotary Kiln bore high temperature  Synthetic Lube, is specifically designed for application on the Stop Block, Riding Ring and Filler Bars of Horizontal Calciners, Rotary Kilns and Dryers. Auto-Ignition Point >1,000°F.

Installation of Easy Bar® Kiln Tire Bore Lubricant

Installation of Easy Bar® kiln tire bore lubricant; involves placing a whole bar between the filler bars or pads at the five or seven o’clock positions every quarter turn of the kiln as it travels through one full revolution. The number of bars used per tyre/pier may vary depending upon the operational parameters of a kiln. These parameters can include speed of rotation, temperature and load of the kiln shell itself. The shell of the kiln should be at or above 125 degrees Fahrenheit, when the bar is applied. Standard frequency of application is four bars per tire pier per week.

Maximize performance and extend the life
of your kiln with our simple, effective tire lube solution.

Contact Now